Multi flue caps
A larger cap that covers the entire crown and every flue under it also protects the crown from direct rain.
Chimney Parts
Chimney Cap Installation Swedesboro, NJ
Most chimneys in Swedesboro should have a cap, and a local sweep can fit one built from stainless steel or copper and sized to the flue or the crown. Call (856) 490-5006 to reach a local chimney sweep.
An uncapped chimney is an open hole in the roof, and plenty of things find their way into it. Every storm sends water down the flue, and over time that means rusted dampers, wet masonry and a musty fireplace. Animals treat an uncapped chimney like a hollow tree.
Caps are made of a lid that keeps precipitation out and wire mesh walls that let smoke and gases pass. People often confuse the cap with the crown, but the crown is the masonry slab and the cap is the metal piece above the flue.
Not every cap fits every chimney, so sizing and style matter. A single flue cap clamps onto one flue tile, while an outside mount or multi flue cap covers the whole crown and every flue under it. Galvanized caps cost less up front but tend to rust, so stainless steel or copper is the longer lasting choice.
Chimney Cap Installation is often paired with chimney crown repair and chimney animal removal, depending on the cause.
Looking for Swedesboro chimney cap installation? Call (856) 490-5006 and describe the problem to a chimney sweep who works in Swedesboro.
Call nowThe process
The chimney cap installation process
Here is how a chimney sweep usually handles a cap installation.
Look inside
Before the cap goes on, the flue is checked for animals, nests and blockages. If birds are nesting, the timing of the job may change.
Size the cap
The flue tile is measured across the outside and for how far it sticks above the crown. A cap that is too small will not fit, and one that sits too low can restrict draft.
Choose the material
You choose between stainless steel and copper and between a single flue or full crown design. Gas appliance flues may need caps listed for that use.
Look at the crown
While on the roof, the sweep looks for cracks in the crown and loose flue tiles. Any damage found is pointed out to you.
Fasten the cap
The cap is screwed or clamped to the flue tile, or anchored to the crown for outside mount models. It should not wobble when pushed, and you will hear when the mesh should be checked for soot.
What is included
Chimney cap options
Damper caps
A combined cap and damper closes the flue at the top for better energy savings.
Stainless steel caps
Copper caps last a long time and weather to a natural patina which makes them worth the higher upfront cost.
Flue tile caps
A simple cap for one flue extending above the crown is the most common type on brick chimneys.
Wildlife screens
Mesh sides keep birds, squirrels, raccoons and bats out of the flue without blocking the draft.
Related service
Chimney Cap Replacement Swedesboro, NJ
Plenty of chimneys already have a cap, but it may be rusted, bent or missing mesh. Look for rust stains on the crown, a tilted lid or gaps in the screen. Swapping to stainless or copper means the new cap should outlast the old one by years.
In Swedesboro, a missing cap is often noticed only after a nest or a wet firebox appears. Calling (856) 490-5006 with a few details, such as how many flues there are and what fuel you burn, helps the sweep plan the job. Debris that fell in while the cap was off may need to be cleared out first.
Related service
Spark Arrestor Installation Swedesboro, NJ
A spark arrestor is the mesh screen on a chimney cap that stops burning embers from leaving the flue and landing on the roof or nearby trees. Mesh that is too fine clogs with soot, and mesh that is too open lets embers through, so the size follows fire safety standards. Some communities with wildfire risk require them on every wood burning chimney.
A screen that clogs with soot can push smoke back into the house, so the mesh should be checked during sweeping. Smoke rolling back into the room can be a sign the screen is blocked. Cleaning or replacing the mesh restores the draft.
Local help
Chimney Cap Installation Near Me
Chimney caps in Swedesboro take a beating from wind, storms and the freeze and thaw cycles that come with the seasons. Homes in Swedesboro and nearby towns such as Beckett, Mullica Hill, Gibbstown and Woodstown range from older brick chimneys that never had caps to newer ones with rusted galvanized caps, which is why capping the chimney is often the first thing a sweep recommends.
For chimney cap installation in Swedesboro, NJ or nearby towns like Beckett, Mullica Hill, Gibbstown and Woodstown, call (856) 490-5006 to reach a chimney sweep who covers your street.
Chimneys in this climate
Winters here are long and cold, and the heating season usually runs from October well into April. The hardest thing on brick here is not the cold itself but the constant swing above and below freezing: water soaks into brick, mortar joints and the crown on a mild day, freezes overnight and expands, and each winter widens the cracks a little more. Wind driven rain from coastal storms finds any gap in flashing, too. That is why chimney cleaning in Swedesboro is usually booked in the fall, before the first cold night.
Why call
Why act early
Less damage
Small chimney problems caught early usually stay small repairs.
Familiar with local homes
Chimney sweeps in Swedesboro know the chimneys and fireplaces common in local homes.
Know what happens next
Ask your questions before you agree to anything.
Common questions about chimney cap installation
What should I do if birds are nesting in my chimney?
If the birds are chimney swifts, federal law protects them, and they have to be left alone until nesting season ends. A chimney sweep can identify the bird and tell you when the flue can be cleared. Capping after the birds migrate keeps the next season from repeating.
Does my chimney really need a cap?
Chimney caps block water, debris and wildlife from getting into the flue while still letting smoke out. Water damage and animal nests are two of the most common chimney problems, and both are largely prevented by a cap. Most chimney sweeps recommend a cap on every flue.
Is a chimney crown the same as a cap?
They are two different parts: the crown is the masonry top of the chimney and the cap is the metal piece over the flue. The cap is the metal cover with mesh sides that sits over the flue opening above the crown. Each protects a different part, so both should be in good shape.
Can a chimney cap cause draft problems?
Well fitted caps rarely cause draft trouble. Trouble usually traces back to a clogged screen or a cap that is undersized or mounted too close to the flue opening. Ask the sweep to check the cap whenever the chimney is cleaned.
How often do chimney caps need to be replaced?
Lifespan depends mostly on the material. Galvanized and painted steel caps tend to rust within several years, especially near the coast or with oil fired appliances. Storms and animals can damage any cap, so it is worth having it checked when the chimney is swept.
More questions? Call (856) 490-5006
Related services
Chimney Crown Repair
Repairing the concrete slab that caps the top of the chimney, with a proper overhang and drip edge.
Learn moreChimney Animal Removal
Removing birds, raccoons, squirrels and nests from fireplace and stove chimneys, and cleaning up what they left behind.
Learn moreChase Cover Replacement
Installing new stainless or copper chase tops custom sized to the chase so water stays out.
Learn moreChimney Leak Repair
Stopping chimney leaks at the source, before the water rots framing or ruins the flue.
Learn more
Looking for something else?
See all chimney servicesGet chimney cap installation help in Swedesboro
Call (856) 490-5006 for a local chimney sweep in Swedesboro and nearby towns.
(856) 490-5006
Free to call. No forms to fill out.